Coolant Reservoir: Service and Repair

Removing

- Remove the pressure cap and sealing cap.

- Remove windscreen washer reservoir and the bracket rear upper securing screw.

- Disconnect the expansion pipe from the bottom of the expansion tank and the overflow pipe from the filler neck.

- Remove expansion tank securing nut and bolt, carefully displace windscreen reservoir bracket. and lift the tank clear.

Refitting

- Carefully displace the windscreen washer reservoir and locate the expansion tank to the inner wing.

- Fit and tighten nut and bolt to secure.

- Refit the expansion pipe to the bottom of expansion tank and the overflow pipe to the filler neck.

- Fit and tighten the windscreen washer reservoir bracket securing screws.

- Refit the washer reservoir.

- Top-up cooling system.

- Refit pressure cap and sealing cap.