Installation

1. Install ball joint-to-control arm attaching nuts and bolts and torque to 80 ft. lbs.
2. Install strut-to-knuckle attaching nuts and bolts and torque to 80 ft. lbs.
3. Install tie rod-to-knuckle attaching nut and torque to 42 ft. lbs.
4. Install brake rotor.
5. Install brake caliper-to-knuckle attaching bolts and torque to 41 ft. lbs.
6. Install brake hose to caliper and torque fitting to 13 ft. lbs.
7. Install wheel and tire assembly, then lower vehicle.
8. Apply suitable grease to axle shaft threads and nut, then install axle-to-hub attaching nut, washer and cotter pin. Torque nut to 137 ft. lbs.
9. Tighten wheel nuts, then bleed brake system.