Window Run Channel Replacement - Rear Door

Window Run Channel Replacement - Rear Door

Removal Procedure




1. Position the rear door window in the full up position.
2. Remove the rear door trim panel.
3. Remove the rear inside door handle.
4. Remove the rear door speaker.
5. Remove the rear door water deflector.
6. Remove the bolt retaining the rear door window run channel to the inner door panel (2).
7. Slide the window run channel (1) down out of the upper window frame.
8. Remove the window run channel from the rear door.

Installation Procedure




1. Install the window run channel to the rear door.
2. Slide the window run channel (1) up into the upper window frame.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolt retaining the rear door window run channel to the inner door panel (2).

Tighten the rear door window run channel bolt to 9 N.m (80 lb in).

4. Install the rear door water deflector.
5. Install the rear door speaker.
6. Install the rear inside door handle.
7. Install the rear door trim panel.