Rear

REMOVAL OF SEAT BELT RETRACTOR
1. Remove the outer and inner anchors.
- Remove the rear seat cushion, refer to "Removal and Installation".
- Remove the outer anchor fixing anchor bolt and the anchor bolt tightening the inner anchor together with the seat belt buckle.

2. Remove the seat belt assembly.
- Remove the rear seatback, refer to "Removal and Installation".
- Remove the rear kicking plate, the rear wheelhouse garnish and the rear pillar finisher, refer to "BODY SIDE TRIM".
- Remove the seat belt finisher from the rear parcel shelf finisher, refer to "REAR PARCEL SHELF FINISHER".
- Remove the rear parcel shelf finisher, refer to "REAR PARCEL SHELF FINISHER".
- Remove the fixing anchor bolt of the seat belt retractor.

INSTALLATION OF SEAT BELT RETRACTOR
- Install in the reverse order of removal.
- Tighten by specified torque.
Tightening torque : 49.0 N.m (5.0 kg-m, 36 ft-lb)