Transverse Link

Removal and Installation





REMOVAL
1. Remove tire with power tool.
2. Remove under cover with power tool.
3. Remove mounting nut on lower portion of stabilizer connecting rod with power tool.
4. Remove mounting nut between transverse link and shock absorber lower arm.
5. Remove mounting nut between transverse link and front suspension member with power tool.
6. Remove transverse link from steering knuckle.
7. Remove transverse link from vehicle.

INSPECTION AFTER REMOVAL
Visual Inspection
Check transverse link and bushing for deformation, cracks, or damage. If any non-standard condition is found, replace it.

INSTALLATION
^ Refer to FSU-26, Components for tightening torque. Install in the reverse order of removal.

NOTE: Refer to component parts location and do not reuse non-reusable parts.

^ Perform final tightening of front suspension member installation position and shock absorber lower side (rubber bushing) under unladen condition with tires on ground. Check wheel alignment.