Parking Brake Control: Service and Repair

PARKING BRAKE CONTROL





Removal and Installation
REMOVAL
1. Remove instrument lower driver panel (pedal type).
2. Remove center console.
3. Remove adjusting nut from device assembly.
4. Remove rear tire from vehicle with a power tool.
5. Remove rear disc caliper and disc rotor.
6. Remove parking brake shoe, and remove rear cable from toggle lever.
7. Remove rear cable mounting nuts and bolts.
8. Remove right and left rear cable from vehicle.
9. Remove diagnosis sensor unit with sensor mount bracket.
10. Remove front cable mounting nuts and bolts (pedal type), and remove front cable from vehicle.
11. Remove mounting bolts of device assembly, and remove device assembly from vehicle.

INSTALLATION
1. Installation is in the reverse order of the removal. Tighten mounting bolts and nuts to the specified torque.

CAUTION: Do not reuse adjusting nut of parking cable.

2. Adjust clearance of parking brake shoes.