Excessive ABS Function Operation Frequency

Excessive ABS Function Operation Frequency
1. CHECK START
Check brake force distribution.
OK or NG
OK >> GO TO 2.
NG >> Check brake system

2. CHECK FRONT AND REAR AXLE
Make sure there is no excessive play in the front and rear axles.
OK or NG
OK >> GO TO 3.
NG >> Repair.

3. CHECK WHEEL SENSOR
Wheel Sensor Inspection
^ Wheel sensor mount and damage inspection
^ Sensor rotor mount and damage inspection
^ Wheel sensor connector connection inspection
^ Wheel sensor harness inspection
OK or NG
OK >> GO TO 4.
NG >>
^ Replace wheel sensor or sensor rotor.
^ Repair harness.

4. CHECK ABS WARNING LAMP DISPLAY
Make sure the warning lamp turns off approximately 1 sec. After the ignition switch is turned on or when driving.
OK or NG
OK >> Normal
NG >> Perform self-diagnosis. Refer to BRC-26, "Self-Diagnosis". CONSULT-II / Self-Diagnosis