Connecting Rod, Engine

NOTE: All specifications are in inches, unless specified otherwise.

Crankshaft:
Standard Journal Diameter:
Main Bearing [07]
Crank Pin [08]
Out Of Round 0.0001
Taper 0.0001

Bearing Clearance:
Main Bearings .0014-.0021
Connecting Rod Bearings .0013-.0023

Connecting Rods:
Pin Bore Diameter .8661-.8666
Side Clearance .0079-.0138

[07] -- Grade No. 0, 2.3610-2.3612 inch; grade No. 1, 2.3607-2.3610; grade No. 2, 2.3605-2.3607 inches; grade No. 3, 2.3603-2.3605 inch.
[08] -- Grade No. 0, 1.7704-1.7706 inch; grade No. 1, 1.7702-1.7704 inch; grade No. 2, 1.7699-1.7702 inch.