Over-Run Clutch

DIMENSIONS
Drive Plate Thickness:
Standard 1.52 - 1.67 mm (0.0598 - 0.0657 inch)
Wear Limit 1.8 mm (0.071 inch)
Retaining Plate/Snap Ring Clearance:
Standard 1.0 - 1.4 mm (0.039 - 0.055 inch)
Allowable Limit 2.0 mm (0.079 inch)

GENERAL
No. Of Drive Plates 4
No. Of Driven Plates 7

SERVICE SPECIFICATIONS
Retaining Plate Part No. And Thickness:
31537-51X11 3.8 mm (0.150 inch)
31537-51X12 4.0 mm (0.157 inch)
31537-51X13 4.2 mm (0.165 inch)
31537-51X14 4.4 mm (0.173 inch)
31537-51X15 4.6 mm (0.181 inch)
31537-51X64 4.8 mm (0.189 inch)