Cruise Control: Adjustments

Automatic Speed Control Device (ASCD) Wire Adjustment:

CAUTION:
^ Be careful not to twist ASCD wire when removing it.
^ Do not tense ASCD wire excessively during adjustment.

After confirming that accelerator wire is properly adjusted, adjust the tension of ASCD wire in the following manner.

1. After adjusting the length of the accelerator wire, turn a securing nut by 1/2 to 1 turn from throttle open starting position to the wire loosening direction to fix. (Must be securing carried out to prevent response delay of operation of the ASCD)
2. Securely tighten lock nut to hold adjusting nut in place.