B: Standard Charge

B: Standard Charge:

Fig # 4 Initial Charging Current Setting (Standard Charge):

Fig # 5 Additional Charge (Standard Charge):

CAUTION

a. Do not use standard charge method on a baffery whose specific gravity is less than 1.100.
b. Set charging current to value specified in Fig. 4. If charger is not capable of producing specified current value, set its charging current as close to that value as possible.
c. Keep battery away from open flame while it is being charged.
d. When connecting charger, connect leads first, then turn on charger. Do not turn on charger first, as this may cause a spark.
e. If battery temperature rises above 60°C (140°F), stop charging. Always charge battery when its temperature is below 60°C (140°F).