Even After the Engine Is Started, the Ass Warning Lamp Remains on

Even After The Engine Is Started, The ASS Warning Lamp Remains ON.

DETECTING CONDITION:

INSPECTION PROCEDURES

CHECK DTC OUTPUT.

1. Connect the Hi-Scan (pro) to the 16P data link connector located behind the driver's side kick panel.
2. Check the DTC output using Hi-Scan (pro).
Is DTC output?

YES
^ Repair circuit indicated by code output.

NO
^ Check instrument cluster.

CHECK INSTRUMENT CLUSTER

Disconnect the cluster connector and turn the ignition switch ON.
Does the ABS warning lamp remain ON?

YES
^ Replace the instrument cluster.

NO
^ Check for open wire.

CHECK FOR OPEN IN THE WIRE

Check for continuity in the wire between cluster and ABS control module.
Is there continuity?

YES
^ Replace the ABS control module and recheck.

NO
^ Repair an open in the wire between cluster and ABS control module.