Disassembly and Reassembly

1. Disconnect the vacuum hose from the vacuum nipple.
2. Remove 2 mounting bolts from each of the vacuum motor.
3. Remove the vacuum hose mounting bracket and bolt.




4. Remove the vacuum motor and vacuum hose assembly.




5. Disconnect the connection at both sides of the heater core cover and remove thee cover and the vacuum nipple.
6. Pull out thee heater core.




7. Remove eight (8) clips which is holding both cases around the heater unit.
8. Disassemble the heater unit.
9. Unlatch the control door latches with a sharp-tip driver from the outside of the case and remove control doors from the case.
10. Reassembly is the reverse order of disassembly.