Camshaft, Engine
DIMENSIONSCam Lobe Height:
Standard Value:
Exhaust 45.049 mm (1.7736 inch)
Intake 44.449 mm (1.7499 inch)
Service Limit:
Exhaust 44.549 mm (1.7538 inch)
Intake 43.939 mm (1.7302 inch)
Journal O.D. 28.000 mm (1.1023 inch)
Bearing Oil Clearance 0.020-0.061 mm (0.0008-0.0024 inch)
End Play 0.010-0.200 mm (0.0040-0.0080 inch)
CAMSHAFT TIMING
Intake Valve:
Opens (BTDC) 6°
Closes (ABDC) 46°
Exhaust Valve:
Opens (BBDC) 50°
Closes (ATDC) 10°
TIGHTENING SPECIFICATIONS
Camshaft Bearing Cap Bolt 14-15 Nm (140-140 kg. cm, 10-11 ft. lbs.)
Camshaft Sprocket Bolt 100-120 Nm (1000-1200 kg. cm, 74-89 ft. lbs.)
Crankshaft Pulley Bolt 170-180 Nm (1700-1800 kg. cm, 125-133 ft. lbs.)
Cylinder Head Cover Bolt 8-10 Nm (80-100 kg. cm, 6-7.4 ft. lbs.)
Front Case Bolt 20-27 Nm (200-270 kg. cm, 15-20 ft. lbs.
Rear Plate Bolt 8-10 Nm (80-100 kg. cm, 6-7.4 ft. lbs.)
Timing Belt Tensioner Bolt 43-55 Nm (430-550 kg. cm, 31-40 ft. lbs.)
Timing Belt Cover Bolt 8-10 Nm (80-100 kg. cm, 6-7.4 ft. lbs.)
Timing Belt Idler Bolts 43-55 Nm (430-550 kg. cm, 31-40 ft. lbs.)