Muffler: Service and Repair

REMOVAL

WARNING: Before removing or inspecting the exhaust system, ensure that the exhaust system is cool.






1. Disconnect the main muffler from the center exhaust pipe.
2. Remove the rubber hangers and take out the main muffler.

INSTALLATION
Installation is the reverse of removal, noting the following:
a. Install the rubber hangers so that they are identical (left and right) in length.
b. Tighten the parts securely, then confirm there is no interference with any body components.
c. Tighten main muffler to center pipe flange bolts and nuts to 30-40 Nm (300-400 kg. cm, 22-29 ft. lbs.).
c. Tighten center pipe to catalytic converter flange bolts and nuts to 30-40 Nm (300-400 kg. cm, 22-29 ft. lbs.).