Installation

PROCEDURE
1. Install the [1][2]oil pump to the oil pump bracket.
2. Install the suction hose.
3. Install the ribbed V-belt and adjust the belt tension.
4 Connect the pressure hose to the [1][2]oil pump, and the suction hose to the oil reservoir.


NOTE: Install the hoses so they are not twisted and they do not come in contact with any other parts.


5. Replenish the fluid with ATF DEXRON II type.
6. Bleed the system.
7. Check the [1][2]oil pump pressure.
8. Install parts to the torque specifications.