Vacuum Brake Booster: Service and Repair

Fig. 2 Power Booster Assembly:

REMOVAL
1. Remove the master cylinder. Service and Repair

CAUTION:Do not allow brake fluid to remain on a painted surface. Wash it off immediately.

2. Disconnect the vacuum hose from the booster.
3. Remove the operating rod from the brake pedal.





4. Loosen the booster mounting nuts to remove the booster assembly.

INSTALLATION

1. Install the master cylinder.
2. Attach the booster/master cylinder to the dash panel.
3. Reinstall the vacuum hose securely to prevent vacuum leaks.
4. Couple the operating rod with the brake pedal.
5. Bleed the system. Service and Repair

NOTE: Do not attempt to disassemble the brake booster. It's not serviceable.