High Pressure Hose

NOTE: While installing tube and hose assembly, be sure to align white marks on each fitting.





1. Install the hoses so that they are not twisted and they do not come in contact with any other parts.





2. Detach the pressure hose mounting clamp.





3. Disconnect the pressure tube fitting at the gear box side.





4. Lift up the vehicle and detach the mounting clamp which is holding both of the pressure tube and the return tube.





5. Lift down the vehicle and remove the connector (24 mm).





6. Remove the pressure hose and tube assembly.
7. Installation is the reverse order of removal.

NOTE:
- Install the pressure hose and tube so that they are not twisted and they do not come in contact with any other parts.
- After installation, bleed the system.