Power Steering Fluid: Service and Repair

1. Jack up the front of the car and suitably support.
2. Disconnect the return hose from the oil reservoir and plug the oil reservoir.
3. Connect a hose to the disconnected return hose, and drain the oil into a container.
4. Disconnect the high-tension cable at the ignition coil side. While operating the starter motor intermittently, turn the steering wheel all the way to the left and then to the right several times to drain the fluid.
5. Connect the return hoses, then fill the oil reservoir up to the "MAX" level with approximately 0.9 liter (0.95 quarts) of AFT DEXRON II or TEXAMATIC DEXRON II
6. Bleed the system.