Installation

1. Using the bolt pattern shown in the illustration, install the front case assembly with a new gasket, and tighten the bolts to 12-15 Nm (120-150 kg. cm., 9-11 ft. lbs.).






Bolt Pattern:
(A) 25 mm (0.98 inch)
(B) 30 mm (1.18 inch)
(C) 45 mm (1.77 inch)
(D) 60 mm (2.36 inch)
2. Install the crankshaft sprocket.
3. Install the timing belt.
4. Install the crankshaft pulley.
5. Install the oil screen.
6. Clean both gasket surfaces of the oil pan and the cylinder block.






7. Apply sealant into the groove of the oil pan flange as shown.

NOTE:
- Apply sealant approx.4 mm (0.16 inch) in thickness.
- After application of sealant, do not exceed 15 minutes before installing the oil pan.

8. Install the oil pan and tighten the bolts to 6-8 Nm (60-80 kg. cm., 4-6 ft. lbs.).