Side Defogger Vent Trim Removal/Installation

Side Defogger Vent Trim Removal/ Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
- Available through the American Honda Tool and Equipment Program

Driver's Side

NOTE:
- Take care not to scratch the dashboard and its related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Insert the appropriate trim tool into a gap between the side defogger vent trim (A) and the driver's outer middle pad (B), and detach the lower clips (C).






2. Pull out the trim to detach the upper clip (D), then remove the trim.
3. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.