Front

Removal
1. Loosen the wheel nuts slightly.
2. Raise the front of the vehicle, and support it with safety stands in the proper locations.





3. Remove the wheel nuts and front wheel.





4. Remove the mounting bolts for the brake hose bracket.
5. Remove the caliper mounting bolts and hang the caliper assembly to one side.

CAUTION: To prevent accidental damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage.





6. Remove the 6 mm brake disc retaining screws:

CAUTION: Be careful not to damage the ball joint boot.

7. Screw two 8 x 12 mm bolts into the disc to push it away from the hub.

NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.

Installation
1. Install in reverse order of removal.