Shift Interlock Switch

1. Remove the front console.
2. Disconnect the 4P connector from the park pin switch.
3. Check for continuity between the No.3 and No.4 terminals with:
- the shift lever any position other than [P], or
- the push button pushed in [P].
There should be continuity.




4. Check for continuity between the No.3 and No.4 terminals with the shift lever in [P] and the push button released. There should be no continuity. If necessary, replace the park pin switch.

NOTE: Park pin switch 4P connector No.1 and No.2 terminals are for A/T gear position console light.