Procedures
Parking Brake Shoe Lining Break-inWARNING
Do this operation in a safe area.
NOTE:
^ Do the brake linings surface brake-in when replacing shoes with new linings and/or new rear brake disc/drum.
^ Check the number of parking lever clicks. Adjust the parking brake before lining surface brake-in.
1. Park the vehicle on a firm, level surface.
2. Release the parking brake lever.
3. Pull the parking brake lever 2 to 4 clicks.
4. Drive the vehicle for 1/4 mile (400 m) at about 31 mph (50 km/h).
5. Stop the vehicle, and release the parking brake lever for 5-10 minutes to allow the rear brake disc/drum to cool.
6. Repeat steps 3 through 5 three more times.
7. Check the parking brake lever adjustment.