Second Row
Second Row Seat Belt ReplacementNOTE: Check the second row seat belts for damage, and replace them if necessary Be careful not to damage them during removal and installation.
Second Row Seat Belt
1. Remove the rear side trim panel.
2. Pull the carpet back as necessary, and remove the lower anchor bolt (A).
3. Remove the upper anchor cap (A), and remove the upper anchor bolt (B).
4. Remove the retractor bolt (A), then remove the second row seat belt (B) and retractor (C).
5. If necessary, remove the second row seat belt protector (D).
6. Install the second row seat belt and retractor in the reverse order of removal, and note these items:
- Apply liquid thread lock to the anchor bolts before reinstallation.
- Check that the retractor locking mechanism functions.
- Assemble the washers, collars, and bushing on the upper anchor bolt as shown.
- Before installing the anchor bolts, make sure there are no twists or kinks in the second row seat belt.
Center Second Row Seat Belt
1. Remove the headliner.
2. Remove the upper anchor mounting bolt (A), the upper anchor bolts (B), the retractor mounting bolt (C), and the retractor bolt (D), then remove the upper anchor (E), center seat belt (F), and retractor (G).
3. Install the center second row seat belt and retractor in the reverse order of removal, and note these items:
- Apply liquid thread lock to the anchor bolts before reinstallation.
- Check that the retractor locking mechanism functions.
- Before installing the upper anchor bolt, make sure there are no twists or kinks in the center seat belt.
Left Seat Belt Buckle and Center Seat Belt Detachable Anchor
NOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the left second row seat.
2. From back of the seat, remove the screws (A), then remove the anchor cover (B).
3. Remove the center anchor bolts (A).
4. Release the hooks (A), then remove the seat belt buckle pocket (B).
5. Remove the left second row seat belt buckle (A) and center second row seat belt detachable anchor (B) from the elastic straps (C), and remove them from the seat cushion.
6. Install the buckle and the detachable anchor in the reverse order of removal.
Center Seat Belt Buckle/Right Seat Belt Buckle
NOTE: The center seat belt buckle is shown, and the right seat belt buckle is similar.
1. Remove the second row seat.
2. From both sides of the seat, release the hooks (A, B) in the sequence shown, then remove the pivot bolt covers (C). Using a Torx T30 bit, remove the pivot bolts (D).
3. On the left second row seat: Remove the seat belt buckle pocket.
4. On the left second row seat: Remove the left second row seat belt buckle (A) and center second row seat belt detachable anchor (B) from the elastic straps (C), then remove the buckle and detachable anchor under the seat cushion.
5. Remove the center seat belt buckle (D) or right seat belt buckle from the elastic strap (E).
6. Lift the seat cushion (A) up.
7. Remove the screws (A), then remove the inner slide cover(B).
8. Remove the center anchor bolt (A), and remove the seat belt buckle (B).
9. Install the buckle in the reverse order of removal.