Front Seat Belt Buckle
Seat Belt Buckle1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.
3. Remove the front seat.
4. If equipped, remove the center table.
5. Remove the storage box.
6. Remove the center cover, driver's, passenger's.
7. Driver's: If equipped with seat heater, remove the harness band (A), and disconnect the seat sub- harness connector (B). Without seat heater, detach the seat belt switch connector clip (C). Detach the seat belt buckle tensioner clip (D), and harness clip (E).
8. Passenger's: If equipped with side airbag or seat heater, remove the harness band (A), and disconnect the seat sub-harness connector (B). Without side airbag, detach the seat belt switch connector clip (C) from the harness bracket (D). Detach the seat belt buckle tensioner connector clip (E) from the harness bracket.
9. Remove the center anchor bolt (A), and remove the seat belt buckle (B).
10. Detach the harness clip (C), and pull the seat belt switch/tensioner harness (D) out through the space between the seat cushion and the seat linkage (driver's seat), or the hole on the seat track (passenger's seat).
Center Anchor Bolt Construction:
11. Install the buckle in the reverse order of removal, and note these items:
- Apply liquid thread lock to the center anchor bolt before reinstallation.
- Assemble the washers on the center anchor bolt as shown.
- Reconnect the negative cable to the battery.
- Enter the anti-theft code for the radio, then enter the customer's radio station presets.