System Specifications

DIMENSIONS
Pinion End Clearance 0.13-0.89 mm (0.005-0.035 inch)
Turbine Shaft End Play 0.1-0.8 mm (0.004-0.030 inch)

TIGHTENING SPECIFICATIONS
Adapter Case Valve Body 10 Nm (87 inch lbs.)
Adapter Case Oil Pan 11 Nm (96 inch lbs.)
Drain Screw 38 Nm (28 ft. lbs.)
Earth Harness Bolt 20 Nm (15 ft. lbs.)
Flex Plate 54 Nm (40 ft. lbs.)
Front Crossmember 78 Nm (58 ft. lbs.)
Heat Protector Bolt 6 Nm (52 inch lbs.)
Main Case Oil Pan 11 Nm (96 inch lbs.)
Manual Detent Screws 20 Nm (15 ft. lbs.)
Mode Switch Shield 13 Nm (113 inch lbs.)
Mode Switch Bolt 13 Nm 9113 inch lbs.)
Oil Seal Ring 3 Nm (26 inch lbs.)
Overfill Screw 38 Nm (28 ft. lbs.)
Park Lock Nut 22 Nm (16 ft. lbs.)
Rear Mount Nut 41 Nm (30 ft. lbs.)
Rear Propeller Shaft 63 Nm (46 ft. lbs.)
Selector Lever Nut 23 Nm (17 ft. lbs.)
Speed Sensor 9 Nm (78 inch lbs.)
Stiffener 48 Nm (35 ft. lbs.)
Third Crossmember 50 Nm (37 ft. lbs.)
Transfer Protectors 37 Nm (27 ft. lbs.)