Transfer Case Skid Plate

REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.





2. Two bolts and transfer case skid plate from transfer case crossmember.
3. Four bolts and transfer case skid plate from frame rail crossmember.

Inspect
- Transfer case skid plate for distortion or damage. Replace as necessary.

INSTALL OR CONNECT
1. Transfer case skid plate to frame rail crossmember; secure with four bolts.
2. Transfer case skid plate to transfer case crossmember; secure with two bolts.
- Tighten transfer case skid plate bolts to 54 Nm (40 ft. lbs.).
3. Lower vehicle.