Seals and Gaskets: Service and Repair

REMOVE OR DISCONNECT
^ Tools Required:
- J 6125-B Slide Hammer
- J 23129 Converter Housing Seal and Extension Housing Oil Seal Remover

1. Raise and suitably support vehicle.
2. Support transmission with a suitable hydraulic jack.
3. Transfer case from vehicle.





4. Transfer adapter case seal from transfer adapter case using J 23129 with J 6125-B.

Inspect
- Transfer adapter case for cracks and other damage. Replace as necessary.

INSTALL OR CONNECT
^ Tools Required:
- J 35538 Axle Shaft Seal Installer
- J 36850 Transjel(R) Transmission Assembly Lubricant

1. Apply a thin coat of J 63850 to the transfer adapter case seal surface.





2. New transfer adapter case seal into the transfer adapter case using a J 35538.
3. Apply J 36850 to the new transfer adapter case seal lip.
4. Transfer case into vehicle.
5. Remove hydraulic jack from under transmission.
6. Lower vehicle.