Pressure Adjustment

HIGH PRESSURE
When rear brake pressure is higher than specifications loosen bolt securing lower portion of load sensing spring and move the bolt upward. A bolt movement of 1 mm will result in about 2.4 kg/sq.cm (34.20 psi) decrease in hydraulic pressure. Tighten load sensing spring bolt after reaching specifications.

LOW PRESSURE
When rear brake pressure is lower than specifications loosen bolt securing lower portion of load sensing spring and move the bolt downwards. A bolt movement of 1 mm will result in about 2.4 kg/sq.cm (34.20 psi) increase in hydraulic pressure. Tighten load sensing spring bolt after reaching specifications.

NOTE: When finished tighten load sensing spring bolt to 23 Nm (17 ft. lbs.)