Rear Wiper Motor

Removing Rear Wiper Motor And Rear Wiper Linkage:

Remove or Disconnect
1. Negative (-) battery cable.
2. Fourteen plastic retaining clips and rear door inner trim panel.
3. Three screws securing rear wiper motor to rear door.
4. One screw and rear wiper motor ground wire from rear door.
5. Gently pry rear wiper linkage from rear 'viper motor crank arm.

IMPORTANT
^ The rear wiper motor crank arm is not serviced separately and should not be disconnected from the rear wiper motor. The crank arm is positioned on the wiper motor to allow the rear wiper arm to return to its normal park position.

6. Rear wiper motor from vehicle.

Install or Connect
1. Rear wiper motor to rear door.
2. Rear wiper linkage to rear wiper motor crank arm.
3. Three screws securing rear wiper motor to rear door.
4. Rear wiper motor ground wire to rear door; secure with one screw.
5. Rear door inner trim panel; secure with fourteen plastic retaining clips.
6. Negative (-) battery cable.