Tail Lamp: Service and Repair

Removing Rear Combination Lamp Assembly:

Rear Combination Lamp Identification:

Remove or Disconnect
1. Negative (-) battery cable.
2. Two screws securing rear combination lamp assembly.
3. Pull rear combination lamp assembly away from rear end panel to gain access to bulb sockets.
4. Electrical connector and three bulb sockets from lamp assembly.
5. Rear combination lamp assembly from vehicle.
6. Bulb(s) from socket(s) (if necessary).

Install or Connect
1. Bulb(s) to socket(s) (if removed).
2. Three bulb sockets and electrical connector to rear combination lamp assembly.
3. Rear combination lamp assembly to rear end panel; secure with two screws.
4. Negative (-) battery cable.