Center Trim Bezel

Center Trim Bezel:

Remove or Disconnect
1. Negative (-) battery cable.
2. Ashtray from guide by depressing spring-loaded tab and pulling ashtray out from the guide.
3. Four knobs from heater control unit.
4. Heater control unit face plate from center trim bezel by pulling straight out.
5. Illumination lamp bulb socket from heater control unit.
6. Four screws and center trim bezel from instrument panel.

Install or Connect
1. Center trim bezel to instrument panel; secure with four screws.
2. Heater control unit illumination bulb socket to heater control unit face plate by twisting clockwise.
3. Heater control unit face plate to instrument panel; push until it snaps in place.
4. Heater control unit knobs.
5. Slide ashtray into guide.
6. Negative (-) battery cable.