Front

REMOVAL PROCEDURE
1. Remove the cover for the front seat shoulder belt to expose the bolt.
2. Remove the front seat shoulder belt retaining bolt from the guide adjuster bracket.
3. Remove the left front side door lock pillar garnish molding.
4. Remove the right front side door lock pillar garnish molding.
5. Remove the two guide adjuster bracket retaining bolts from the pillar.
6. Remove the guide adjuster bracket from the pillar.

INSTALLATION PROCEDURE
1. Install the guide adjuster bracket to the pillar.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the two guide adjuster bracket retaining bolts to the pillar.

Tighten
Tighten the guide adjuster bracket retaining bolts to the pillar to 20 N.m (15 lb ft).

3. Install the left front side door lock pillar garnish molding.
4. Install the right front side door lock pillar garnish molding.
5. Install the shoulder belt retaining bolt to the guide adjuster bracket.

Tighten
Tighten the front seat shoulder belt retaining bolt to the guide adjuster bracket to. 53 N.m (39 lb ft).

6. Install the cover for the front seat shoulder belt.