Brake Rotor Replacement

Removal Procedure
1. Raise the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper. Refer to Brake Caliper Replacement.





4. Remove the rotor (RWD only).





5. Remove the rotor (A4WD only).
6. Inspect all of the parts. Replace any damaged or corroded parts.

Installation Procedure





1. Install the rotor to the hub and bearing assembly (A4WD only).





2. Install the rotor to the steering knuckle (RWD only).
3. Install the brake caliper. Refer to Brake Caliper Replacement.
4. Install the tire and wheel assembly.

Important: Before moving the vehicle, pump the brake pedal until it is firm. Check the brake fluid level in the master cylinder after pumping the brakes.

5. Lower the vehicle.
6. Install the brake caliper. Refer to Brake Caliper Replacement.
7. Install the tire and wheel assembly.

Important: Before moving the vehicle, pump the brake pedal until it is firm. Check the brake fluid level in the master cylinder after pumping the brakes.

8. Lower the vehicle.