Evaporator and Blower Assembly Replacement

Evaporator Tube Replacement:

Accumulator Replacement:

Evaporator And Blower Case Replacement:

REMOVE OR DISCONNECT


1. Discharge and recover refrigerant from the system.

2. Electrical connectors, as necessary.

3. Compressor hose assembly (3) from accumulator (6).

4. Evaporator tube (5) from evaporator (10).

- Cap or plug open lines.

5. Screws (29) and nuts (37).

6. Blower case (30).

7. Gasket (24).

INSTALL OR CONNECT


1. Gasket (24).

2. Blower case (30).


NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."


3. Screws (29) and nuts (37).

4. Evaporator tube (5) to evaporator (10).

5. Compressor hose assembly (3) to accumulator (6).


Tighten

- Evaporator tube connection to 41 Nm (30 ft. lb.).

- Compressor hose assembly to 41 Nm (30 ft. lb.).

6. Electrical connectors, as necessary.

7. Refrigerant to the system.

- Check the system for leaks.