Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator and Tube

Material:

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Detach the evaporative emissions (EVAP) canister purge valve from the bracket and position aside.
3. Remove the oil level indicator and tube bolt.
- To install, tighten to 10 Nm (89 inch lbs.).
4. Remove the oil level indicator and tube from the cylinder block.
- Discard the O-ring seal.

5. NOTE: Lubricate the new oil level indicator tube O-ring seal with clean engine oil prior to installation.

To install, reverse the removal procedure.