Seat Cushion Cover - Second Row, 20 Percent

Seat Cushion Cover - Second Row, 20 Percent

Removal and Installation

NOTE: For parts identification and locations, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Release the 2 backrest cover lower J-clips.

2. Remove the screw and pivot bolt cover.
- Route out the attaching strap.


3. Remove the 2 pin-type retainers and lower panel.

4. Lower the backrest, release the cushion cover rear J-clip and route between the cushion and backrest.

5. Release the hook-and-loop strip and remaining cushion cover J-clips.

6. Remove the cushion foam pad and cushion cover together.

7. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat cushion foam.

Release the hook-and-loop strips and invert the cushion cover to the row of hog rings.


8. Remove all hog rings and the cushion cover.

9. To install, reverse the removal procedure.