Rocker Arm Assembly: Service and Repair

Removal

CAUTION: If removing more than one rocker arm, mark the components removed for correct location.

1. Remove the valve cover.





2. Remove the rocker arms.
- Remove the bolts.

Installation





1. Install the rocker arms.
- Position the rocker arms.
- Hand-start the bolts.
- Tighten the bolts in two stages.
- Stage 1: Tighten to 5 Nm (44 inch lbs.).
- Stage 2: Tighten to 32 Nm (24 ft. lbs.).

2. Install the valve cover.