Vehicle Damage Warnings

CAUTION:
^ Care must be taken to avoid scratching the pinch weld.
^ After replacing the urethane installed glass, the vehicle should not be driven until the urethane has cured. The curing times at temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours(decreasing at higher temperatures and lower humidities). Inadequate curing of the urethane may adversely affect the strength of the urethane sealant bond.
^ Wipe off the Urethane Glass Prep immediately after each application because it flash dries.
^ If a vehicle is to be driven within 24 hours of urethane sealant application, Urethane Sealant Essex U-216 meeting Ford specification WSB-M2C316-B must be used due to its one hour cure time.
^ Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.