Front

Removal
1. Raise and support vehicle.
2. Remove wheel and tire assembly, then removed caliper, rotor and hub assemblies.
3. Using a 3-jaw puller, remove indicator ring from hub.
Installation
1. Support center of hub so wheel studs do not rest on work surface.
2. Position new speed sensor ring on hub.
3. Press ring onto hub. Ring must be fully seated against shoulder in the hub.
4. Ensure indicator ring is pressed on straight.
5. Install hub, rotor and caliper assemblies.
6. Install tire and wheel assemblies. Torque wheel nuts to 85---105 ft.lbs.