Liftgate Wiper

OPERATION
With the Ignition Switch in "START" or "RUN", power flows through Fuse 18 and the In-line Circuit Breaker to operate the Liftgate Wiper/Washer.

Washer
When the Washer Switch closes, the Liftgate Washer Pump Motor is powered through the 941 (BK/W) wire.

Wiper
When the Wiper Switch is turned "ON", power flows through the 58 (W) wire to operate the Liftgate Wiper Motor.

When the Wiper Switch is turned "OFF", the 58 (W) circuit is grounded. Power flows through the 63 (R) wire and the RUN contact of the Park Switch. The Motor operates until the cycle is ended. When the switch moves to the PARK contact, the Motor stops and the wiper blades park.