Assembly

1. Place the outer bearing cup in the hub.

Outer Bearing Cup Installation:

2. Insert tool squarely into hub and strike handle until outer bearing cup is seated.

CAUTION: Bearing cup replacer must be held straight during installation to assure proper seating of bearing cup.

Inner Bearing Cup Installation:

3. Place the inner bearing cup in the hub.

4. Insert tool squarely into hub and strike handle until inner bearing cup is seated.

CAUTION: Bearing cup replacer must be held straight during installation to assure proper seating of bearing cup.




5. Place hub inner bearing in the cup.

Inner Hub Seal Installation:

6. Install seal in hub with Ford logo facing up.

Inner Hub Seal Installation:

7. Install hub oil seal on Hub Seal Installer Tool.

Inner Hub Seal Installation:

8. Insert tool with seal squarely into hub.

Inner Hub Seal Installation:

9. Hold tool straight. Strike handle until hub seal is fully seated (until toll strikes hub)

CAUTION: Install new seal if seal is misaligned during or after installation.

Inner Hub Seal Installation:

Unitized wheel seals are standard items on full floating rear axles. The unitized wheel seal combines the function of a wear sleeve and the seal in one self-contained unit with the seal and sleeve surface inside. The unitized design provides maximum protection for the sealing surface during installation and operation.