Engine - Hard Start/Lack Of Power/No Start
Article No.89-8-13
04/19/89
^ Camshaft Or Distributor Gear Failure - 6.1L, 7.0L, 7.5L Engines - Vehicles Built From 1/1/88 To 12/19/88
^ Hard Start - 6.1L, 7.0L, 7.5L Engines - Vehicles Built From 1/1/88 To 12/19/88
^ Lack Of Power - 6.1L, 7.0L,7.5L Engines - Vehicles Built From 1/1/88 To 12/19/88
^ No Start - 6.1L, 7.0L, 7.5L Engines - Vehicles Built From 1/1/88 To 12/19/88
LIGHT TRUCK:
1988-89 E-350, F SUPER DUTY, F-250, F-350
MEDIUM/HEAVY TRUCK:
1988-89 F & B SERIES
ISSUE:
NO start, hard start, rough idle and lack of power may be caused by a camshaft distributor drive gear that is out of specification. This can cause early camshaft or distributor gear failure at less that 10,000 miles.
ACTION:
Install a new camshaft assembly and distributor assembly that are within specification. Refer to the following procedure for service details.
SERVICE PROCEDURE
1. Check the camshaft and distributor gear for signs of wear or failure.
2. Replace both the camshaft assembly and distributor assembly if either gear is badly worn or has failed. Refer to the appropriate Light Truck Shop Manual, Section 21-23 for removal and installation procedures.
CAUTION:
DO NOT REPLACE JUST THE DISTRIBUTOR GEAR.
3. Install a new service camshaft assembly (D9TZ-6250-A) for 6.1L and 7.0L engines and (C8SZ-6250-A) for 7.5L engines.
4. Replace the distributor assembly (-12127-) in all cases. Refer to the Dealer Master Parts Catalog to determine the correct distributor assembly.
PART NUMBER PART NAME CLASS
D9TZ-6250-A Camshaft Assy. BQ
C8SZ-6250-A Camshaft Assy. BG
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage, Powertrain Warranty Coverage
LABOR ALLOWANCE
OPERATION DESCRIPTION TIME
890813A Econoline With A/C (7.5L) 9.1 Hrs.
890813A Econoline Without A/C (7.5L) 8.3 Hrs.
890813A F & B Series With A/C (6.1L & 7.0L) 8.8 Hrs.
890813A F & B Series Without A/C (6.1L & 7.0L) 7.8 Hrs.
890813A F-Series With A/C (7.5L) 10.0 Hrs.
890813A F-Series Without A/C (7.5L) 9.0 Hrs.
DEALER CODING
BASIC PART NO. CONDITION CODE
6250 30
OASIS CODES: 610200, 610300, 620800, 630400, 4700