A. Inspect Track and Drive Operation:

1. Turn the ignition key to the ON position and observe the operation of the motorized shoulder belts.

2. If the belt travels in the track (right and/or left side), the only action required is to lubricate the track as described in Step B.

3. If the belt does not move at all in the track (right and/or left side), replace the track and drive assembly as described in Step C.

NOTE:
Replace only inoperative track and drive assemblies. Any belt movement in the track (sluggish, slow, chattering, etc.) should only require lubrication to restore complete track and drive function without replacement.