Shift Cable: Adjustments

1. If removed, install transaxle right side support bracket attaching bolts and torque to 30 ft-lbs.
2. If removed, torque two rear engine-to-transaxle cradle attaching bolts to 62 ft-lbs.
3. Unlock cable adjuster clip by popping up the lock tab.
4. Place shift lever in D position.
5. Shift transaxle selector lever completely forward, then back two detent positions.
6. Snap cable end into transaxle outer lever ball stud.
7. With shifter hanging under vehicle, snap adjustment lock into lock position.