Adjustment

Figure 2:

1. Bring the sunroof mechanism to the closed position.

2. Position the glass pane; use screws (A) (Figure 2).

3. Position the glass flush with the roof.

4. Tighten the retaining screws.

5. Open and close the sunroof several times to insure that the sliding panel is flush with the roof.

6. If necessary, use the screws and openings (A) (Figure 2) to perfect the adjustment of the sliding panel.

NOTE: IT IS PREFERABLE TO HAVE THE FRONT EDGE OF THE SLIDING PANEL RECESSED ABOUT 1 MM (0.040 IN.) BELOW THE ROOF PANEL (SUNROOF IN THE CLOSED POSITION).