A/C Belt

Figure 33-Air Conditioning And Accessory Drive Belts:

REMOVAL
1. Remove accessory drive belt to gain access to the air conditioning drive belt.
2. To remove air conditioning compressor drive belt, first loosen the tensioner pulley lock nut, thee loosen the adjusting screw to the tensioner pulley assembly until the belt can be removed.

INSTALLATION
1. Install air conditioning belt over drive pulleys. Tighten the tensioner adjusting bolt until the belt is at specified tension using a Belt Tension Gauge. Tighten tensioner puller locking nut to 54 Nm (40 ft. lbs.).
2. Install accessory drive belt and adjust to specified tension.

Air Conditioning Belt Tension Adjustment
Loosen the tensioner pulley locking nut and adjust belt tension by tightening adjusting bolt. Use Belt Tension Gauge. Torque pulley nut to 54 Nm (40 ft. lbs.) after adjustment.