Two Wheel Drive

Fig. 1 MR57W Dual Piston Floating Caliper Disc Brake Assembly. FWD:

1. Remove approximately 1/3 of brake fluid from master cylinder.
2. Raise and support vehicle, then remove tire and wheel assembly.
3. Remove guide pin, then lift caliper body upward and secure with wire.
4. Remove outer shims, brake pad assemblies and pad clips from support mounting.
5. Press caliper piston into caliper bore with suitable tool.
6. Install upper and lower pad clips, pad assemblies and outer shims into support mounting.
7. Lower caliper body, then install guide pin.
8. Depress brake pedal several times to seat pads, then check and replenish brake fluid as necessary.
9. Install wheel and tire assembly and lower vehicle.