Front Door Glass Adjustment

1. Remove trim panel and plastic air shield.
2. Loosen 2 glass stabilizers screws.
3. Loosen 3 glass attachment nuts.
4. Loosen 3 glass track attachment screws.
5. With glass one inch above full down position, push glass outboard until it contacts lower pad of the outer belt weatherstrip. Secure stabilizers.
6. Position glass full up and adjust to seal in door frame. Pry up and rearward on glass to insure proper seal of glass to frame along top and rear edge.
7. Tighten 3 glass attaching nuts, 2 lower glass track attaching screws, and one upper glass track attaching screw.
8. Install plastic air shield and trim panel.